TAKEBOXOn the road every weekend
Construction built for repeated use: aluminium edges, metal corners, butterfly latches.
Custom manufacturing · Czechia & the EU
Flight cases for DJ equipment
Controller, mixer, turntables and headphones — a DJ setup moves almost every weekend. We’ll build a case in which your equipment survives hundreds of transfers between clubs and shows.
Fast setup
Open, plug in, play. We design the case so setup takes minutes, not half an hour.
Expensive equipment
Foam cut exactly to your controller or turntable model — nothing moves, nothing chafes.
What we build
Typical solutions in this category
- Cases for DJ controllers (Pioneer, Denon and others) with cabling space
- Cases for turntables and mixers
- Compact trunks for headphones, styluses and accessories
- Wheeled cases for the whole DJ setup
Typical real-world scenarios
A DJ set moves several times a week — so we build the case for speed: the desk with players stays plugged in, the lid comes off and you play. We also handle combinations with space for headphones, cabling and a laptop, or a slide-out shelf for the controller.
Club vs. open air
For clubs a lighter build focused on fast deployment is enough. For outdoor shows we add tougher construction, dust sealing and off-road castors. Tell us where you play and we’ll adapt the build.
What we recommend for this category
- A case shaped to your desk and players — CDJ, controller and mixer, exactly to size
- Removable lid — set down, lift off, play — no unpacking
- Space for accessories — headphones, cables, laptop, USB
- Wheeled chassis — braked castors, folding handles
Common mistakes you’ll avoid
- A case with no allowance for connectors — cables break against the wall
- Soft foam under a heavy desk — it compresses over time
- No castors: a 30+ kg rig carried by hand
- Shared space for the desk and cables with no separation — scratched surfaces
Z praxe: a resident DJ moves the rig between clubs three times a week. A case with a removable lid and custom foam — the setup is on the table within five minutes, cabling included.
FAQ
What people ask
Can you build a case for a specific controller model?
Yes. Just write the model (e.g. Pioneer DDJ, Denon Prime) — we cut the foam exactly to it, including connector cut-outs.
Will cabling and accessories fit in the case too?
Yes, we design separate compartments or a drawer for cables, headphones and small items so everything has its place.
How long does production take?
Depends on complexity — we confirm the date with the quote; we usually respond to inquiries within one working day.
Can you build a case exactly for my controller?
Yes — send the model or dimensions. We cut the foam for the specific device, including cabling space.
Can I play straight from the case?
Yes, the standard solution is a removable lid — the equipment stays in the case and you play from it.
How do I protect turntables?
Custom foam beds and a separate carrier for cartridges and styluses — sensitive parts travel separately.
Can one case carry CDJs and a mixer together?
Yes, we design rigs as a whole — one case with separate beds, or a set of cases with unified marking.
Find more answers in the guides & FAQ database. Related: Custom flight cases · Foam inserts · Audio equipment.
Send a no-obligation inquiry
Describe what you need to transport — we’ll prepare a solution proposal and a quote. We deliver across Czechia and the EU.